HPA-3000 GT
USD$3,900.00
Description
The HPA-3000 GT is Allnic Audio’s output transformer coupled, stereo headphone amplifier. The HPA-3000 GT has a voltage gain of +28dB, and a maximum output of three (3) watts. It works best with headphones having an impedance of from 30 to 600 ohms.
Key Features
The HPA-3000 GT has the following features:
- Works best with headphones having an impedance of from 30 to 600 ohms
- High-quality, NOS tubes
- Pure Class A operation
- Headphone output: The HPA-3000 GT is equipped with two (2) headphone output ‘jacks’ and two (2) four (4) pin XLR All work for both low and high impedance headphones
- Pre-amp output: The HPA-3000 GT is equipped with one (1) pair of RCA pre-amp outputs, whose impedance is around 10 ohms; this extremely low value provides very powerful driving capability with the widest frequency range to a connected amplifier
- Volume control: The HPA-3000 GT’s volume control is the large knob in the center of front panel. It rotates clockwise (gain increased) and counter-clockwise (gain reduced) – No remote control
- As are all Allnic Audio products, the HPA-3000 GT is fully RoHS (EU Reduction of Hazardous Substances regulation) compliant in construction and materials
Technical Specifications
- Inputs: One (1) pair unbalanced (RCA), One (1) pair balanced (XLR)
- Headphone Output: Two (2) one-quarter inch (1/4”), Two (2) XLR
- Pre-out: one (1) pair RCA
- Frequency Response: 20Hz ~ 20KHz (±0.3db)
- Voltage Gain: +28dB
- Optimum Headphone Impedance: Low under 50 ohms, High under 600 ohms
- Output Wattage: Three (3) watts
- Maximum Input Voltage: Ten (10) volts RMS
- THD (Total Harmonic Distortion): Less than 0.03% (1KHz, Output 1V)
- S/ N Ratio: -63db (CCIR, 1KHz)
- Power Consumption: 48 Watts
- Tubes: 6EM7 x 2
- Fuse: AC 2A, 250V
- Dimensions: 240mm x 330mm x 175mm (W x D x H) (9.5 x 13 x 6.9 inches)
- Weight: Unpacked: 10 kg
Product Support
Coming Soon…